|
Kyoritsu KEW 8035 Non-Contact Safety Phase Indicator
Kyoritsu KEW 8035
| Functions | Phase rotation (Clockwise or Counter Clockwise), Presence of open phase |
|---|---|
| Detection method | Electrostatic induction |
| Measuring voltage range | From 70 to 1000V AC phase to phase (sine wave, continuous input) |
| Clamp diameter range | From 2.4 to 30mm insulated cables |
| Measuring frequency range | 45 to 66Hz |
| Phase rotation | Clockwise: Green arrow LEDs "rotate" in clockwise, Green symbol "CW" lits, Intermittent buzzer Counter Clockwise: Red arrow LEDs "rotate" in counter clockwise, Red symbol "CCW" lits, continuous buzzer |
| Visual indication | Via LEDs with Super brightness function |
| Battery voltage warning | Power LED blinks if battery voltage is too low. |
| Test leads | Double insulated cables, length approx. 70cm |
| Colours code | L1(U): RedL2(V): WhiteL3(W): Blue |
| Applicable standards | IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree2, IEC 61326-1, IEC 61557-1, -7 |
| Operating temperature & humidity range | Temperature/Humidity Ranges -10 to 50, 80% (no condensation) |
| Storage temperature & humidity range | Temperature/Humidity Ranges -20 to 60, 80% (no condensation) |
| Power supply (DC battery) | LR6(AA)(1.5V) 4 * Continuous use: Approx. 100 hours (Auto power off in about 10 min.) |
| Dimensions | 112(L) 61(W) 36(D) mm |
| Weight | 380g approx. |
| Included Accessories | 9096 (Carrying case), LR6(AA) 4, Instruction manual |