|
Kyoritsu KEW 2413R Leakage Clamp Meters
Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
True RMS enables an accurate measurement for distorted waveforms.
Measurement from mA up to AC 1000A
Frequency filter switch to eliminate the effect of the harmonics.
2 way analogue output terminal
Resolution 0.1mA
| AC A (50/60Hz) | 200mA/2/20/200/1000A .5%rdgdgt (200mA/2/20A) .0%rdgdgt (200A, 0 - 500A) .5%rdg (501 - 1000A) |
|---|---|
| AC A (WIDE) | 200mA/2/20/200/1000A .8%rdgdgt (50/60Hz) (200mA/2/20A) .0%rdgdgt (50/60Hz) (200A, 0 - 500A) .0%rdg (50/60Hz) (501 - 1000A) |
| Crest factor | 3.0 or less |
| Conductor size | 68mm max. |
| Frequency response | 40Hz - 1kHz |
| Output | Waveform : AC200mV against the maximum value of each range (1000A range is 100mV) Recorder : DC200mV against the maximum value of each range (1000A range is 100mV) |
| Applicable standards | IEC 61010-1 CAT III 300V Pollution degree 2 IEC 61010-2-032 |
| Power source | 6F22 (9V) 1 *Continuous measuring time: Approx. 60 hours |
| Dimensions | 250(L) 130(W) 50(D)mm |
| Weight | Approx. 570g (including battery) |
| Included Accessories | 9094 (Carrying Case) 6F22 1 Instruction Manual |
| Optional Accessories | 7073 (2WAY Output Cord) |